Hi,
I can't see the window you mean, but our IT manager has said that this was all done a few weeks ago when we had an engineer in to service the lotem. (He couldn't work out the problem either?)
Paul.
Hi sorry for the delay in getting back.
We've got a Lotem800quantum software vers 3.51.02
and a brisque-impose software vers 4.1.76.0
operating system AIX 4.3.3.0
Paul
Hi Mark,
we've a Lotem 800 II, and although i'm not sure if we have the GTO option or not, we had been running 2 other small plate sizes with the short edge along the drum, 524mm x 624mm and 523mm x 688mm and both of these worked without a problem. It's only the 510mm x 708mm plate that errors...
We're a web company that was until recently running 4 different web presses. Now we're down to 2.
When we run plates through our Lotem 8oo we get problems with one plate size only (708cm x 510cm, gripped at short edge), the error no. is 5230 and reads......"No room in buffers timeout....screen...
We're a web company that was until recently running 4 different web presses. Now we're down to 2.
When we run plates through our Lotem 8oo we get problems with one plate size only (708cm x 510cm, gripped at short edge), the error no. is 5230 and reads......"No room in buffers timeout....screen...
Reading between the lines
Reading between the lines
We're running a Lotem 800 with an IGP Thermaline 120 processor and we had lines that appeared on all 3 of our webs at the same time. We dropped the dev and noticed that a guide roller gear, that sits in the dev, was broken, so roller wasn't...
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.
“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.
Learn how…….