Recent content by Riz Khan

Hi, Can anyone reply on this carriage sound problem, I hope someone will help. regards

Please help to solve problem and mention which capacitor you have change on PCB Board enclosed you will find picture of Carriage PCB board

Hi Digiservice, Thanks for your reply, please tell me which capacitor you have changed on Board, also do you see now OC RED LED LIT on Carriage Bd. regards

Hi, sound is like humming / smashing ... we observe "OC" RED LED light lit on the carriage drive board - Indicates the motor drive current exceeds +/-12 Amp. with fast drum speed normal, and with slow drum speed problem. regards

Hi, We have sometime carriage sound (very bad) during imaging and returning to home position, also when the drum speed is slow, infact sound is coming from carriage motor. We found technical document mention, The main cause of this problem seems to be an excessive DC offset Volts on the...

Hi, Yes film stops in the middle of drum with both Cassette A & B and film stops before flapper start, we have also checked flapper test which is OK. regards

Hi, I am facing problem on Avantra 44 Error # 6 ( Film Jam ) during film loading, film move and stop in the middle of drum, I checked all media movement parts are working OK specially NIP Assy, sensors are OK specailly supply feed sensor, DEC parameters are OK. If someone knows what is the...

Re: Creo thermal head 20 watts or 40 watts ? Hi Mac, I thought 20 Watt at S or F speed lasts longer than 40 watt heads. If machne is on reasonably slow imaging speed and low head power it last between 8,000 - 10,000 hours, is this correct ! regards Riz

Re: Viper 1.9.2 engineless mode message / new APIS ?? Hi, At the time of bootup Mac on startup screen you should see Agfa extention loaded, and if this not happen your card driver is not loaded and cannot communicate with eninge I think thats reason your RIP is on engineless mode. I...

Hi, Creo thermal heads 20 watts or 40 watts in 3244 old Trendsetters, I have no high speed requirement, neither use processless plates, can I output FM screening (staccatto) with 20 watts head ?, what are the features missing in 20 watts head compare to 40 watts head. regards Riz Khan

Re: agfa apoge pdf rip problem Hi Lio, Agfa RIP copy files of each screen rulling set like 175 lpi @ 2400 dpi during installation, for Round Dot & Elliptical DOT, might be your installation CD is crupted, let me know if you still require then I will send you the required files which you can...

Hi, I am looking to buy a used working Agfa APIS PAC Board , if anyone have please contact me. regards Riz