Recent content by Ronald

Hi steve, Do you still have the mac Rip v5.3(Harlequin)? I have a Lino 330 can it work with it ? I'am in Kenya, East Africa how much will it cost together with shipping ? Thanks.

Hi all wanted an inexpensive LL330 interface card with any level 2 or 3 Rip.

Hallo. Doe's it mean the RIP 40 is Mac based ? I only have to connect it to a PC through PC MacLan ?

Hi, must I connect the ethernet cable to the Rip 40 for it to get to ..0 status. I've not connected it I guess that is why it hangs on LIr status.

Hi, might you have any Rip 40 disk configuration downloads for PC and mac ?

Help on Linotronic 330 and RIP 40 Thanks rbailleu, the dial is on 6 which should be for ethernet connection however I have gotten round the issue with the imagesetter on panel mode I can now get to the L mode. The problem that persists is the problem on the RIP 40 it still hangs on the LIr...

I recently acquired a Lino 330 and rip 40 that I wanted to set up on my own please can any one give me a hand ? The specs for the rip 40 are 16 mb ram and 80 mb storage capacity I have both manuals, minus RIP 40 utility software for PC but; I am experiencing the following; - the rip 40 hangs...

Lintronic 330 and rip 40 Lintronic 330 and rip 40 Hi Dave, Thanks for the response. I am still in the process of installing with no much success. The specs for the rip 40 are 16 mb ram and 80 mb storage capacity. I'll be using film and sometimes resort to stripping if the job is bigger than...

Introduction Introduction Hi all, My name is Ronald, and I was glad to know the print planet forum thanks for registering me. I come from Kenya we are well known for long distance races and the wildlife. I work for De La Rue ltd based in Nairobi Kenya and I also wanted to venture into private...