Recent content by Salo

I tried in 3 different ways to contact Terry off-list without success. Maybe somebody now a better way ( aka e-mail )

Hello, I want to convert some RGB tif files to CMYK ( fogra39 ) in Alwan CMYK optimizer. Can anybody help with some hints about the settings ? Thanks

Regarding Colorgate, can anybody help with the procedure for adjusting the Lc and Lm curves ? Thanks

Hello Gordo, the densities are: C1.65, M1.65, Y1.23 K1.95 - paper excluded Regards, Salo

Yes, I verified the print contrast: K 46 M40 C 40 Y 34. The inks are "normal". I will try to repeat with lower SID values. About OBA- I don't have a UV cut device. Only I1 and X-Rite 530 without filtration. For the profile target I want to compensate via software. The G7 method for non standard...

Thank you Terry. Yes, you are right. The calibration was in one day and the verification in the next day.I adjusted the SID's for Dmax ( "G7 extreme"). About consistency : it's a problem to hit exactly the same targets because the SM52 it's a little old and not 100% stable. The paper is not...

No, it's not the calibration - is the second run ( after adjusting plate curves ). This is strange. Could be related to the fact that the paper it's not ISO conforming ( a1 b-6 ) and the inks are a little outside standard ? Thanks

Sorry, 0.54 for HR ( by mistake is HC in my question )

Hello, I tried to calibrate my SM52 using G7 methodology. The problem is achieving 0.54 D for HC. At 0.46 the primaries are oversaturated ( scumming to ). Seems that 0.33 it's the right density - but to low in regard to G7 specifications. And another strange problem: the plates are made with...

Hello, Can anybody help with Printopen IT8/7.4 charts for Eye-One ? Thanks

Nobody ?...

Hello, Anybody can give me some advises regarding G7 calibration for screen printing ? Thanks

Thanks Kristian, but I need a screen angle finder ( to determine the screen angles for CMYK and spot colors )

Hello, Can anybody help with a file for screen angle finder ? Thanks