Recent content by Sandeep5

Requesting some suggestion/ help please !

The video card on my KM EFI Fiery is not being recognized. A new card is on the way but will take a bit of time. I see a USB port and a parallel port on the KM6500 machine. Can anyone please let me know if it is possible to print through any of these ports directly (without fiery) and how can I...

Thanks a million to all ! We have shortlisted 2 machines an Akiyama 22x32 and a Mitsubishi 19x28. Lithrone needs more specialised service backup which may not be available in this area. Will go for testing the two machines by next week. All the suggestions will be of great help. Thanks a lot to...

Thanks ! We are looking at the 28"-32" size. We have got quotations from several reputed vendors. But a lot of details are confusing... For example... OPC, Komorimatic , Semi APC, PQC, API etc. which really does not make sense to me. What should be the basic features of a fairly good condition...

We are basically Digital Printers, now trying to widen our services by installing a 4 col sheet fed offset unit. My knowledge of sheet fed offset machines is however very limited. Several reconditioned machines are available here (Lithrone / Mitsubishi / Akiyama). It would be helpful if I...

I am printing on the DC2060 (oil based) printer. When I try to laminate the prints on my thermal laminator with 35-40microns film at a temp of around 110-120 degrees, the lamination starts to come off from the edges after trimming the sheets. Happens more with the darker color prints. The oil...

Need Help with my DC2060 My Xerox DC2060 restarts by itself immediately after displaying the Xerox screen ( Just before the Fuser Lamps need to come on). Checked all the Fuser thermostirs, Fuses etc but no use. Please Help !

That is the dilemma! Considering the 6060 as it is a solid workhorse or the DC250 which is better technology but less of a production machine. How would you compare your DC5252 and DC250 in terms of service backup and reliability ??

I have an option of buying either a Reconditioned DC250, DC6060 or a Xerox 5000 as a second machine to my DC2060. The DC6060 is almost the same as the 2060 (Oil Based / Absolete technology) but reliable. The DC250 offers very good print quality and comes at a good price. Not sure about the...

No problem !! Guess, will have to wait for 2 days. Thanks for the help.

Same family as the 6060. The 6060 is a later model. Service house here is closed for this weekend... cannot find an engineer. Got a few jobs to complete. Hoped if someone could help !!

My DC2060 is displaying a 10-387 fault code. Its probably due to some thermistor problem on the external heat roller. Can someone help please ??

Yes , the floor level seems to be quite an important issue... we too are on the verge of purchasing a used DC5252 and the first thing that the engineer pointed out was that the floor should be level !!

Faced the same problem on my old DC12 for more than 45 days.... After incessant adjustments failed..... Replaced the magenta developer and bingo !! Problem solved.

Ok ! Ubertech... now that puts me in a fix but I'll definitely give the 2060 another serious consideration. Thanx !