Recent content by scotrinaf

So far jams are almost non-existant unless it's the last sheet out of the tray, then it tends to jam occasionally. The key is making sure your paper size is dead on (We cut all our papers), and making sure you select the appropriate finish & thickness. We've found that the color is more accurate...

Don't forget everyone's market is different. For instance, I might be able to get away with $.59/click while someone else might have to go down to $.29/click to be competitive. But I've also seen people charging $1.29/click (for 12x18)... Just thought they may want to check around in their...

Digital... Press would be much less... but take a day or two longer.

I'll sell you a Richoh C900 for $3,500 with around 5mil impressions on it... You are responsible for securing a maintenance agreement on it as well as moving it... (It's dissassembled and ready for pickup)

We would print on our 28x40 press... :) In my opinion that's too large to print on digital printer, BUT, if we had to do it... $12,500 We are open 24/7 and have a full bindery, so delivery is no problem and we have plenty of stock, supplies, and manpower.

We recently installed the Ricoh C7100 and while running a 4 page duplexing job with slip sheets we encountered something quite unusual... Settings (with problems) Duplex on (open to left or open to top didn't change anything), pull from tray #3 specified Pull Slip Sheet from tray #4 specified...

We installed the Ricoh C7100 about 6 weeks ago... We researched MANY different machines and settled on this one. We chose not to add the 5th unit for now since we can expand to that later, but we did get the optional BY5010 Multi Bypass Tray which allows us to print a 13" x 49" sheet. I can tell...

We installed the Ricoh C7100 about 6 weeks ago... We researched MANY different machines and settled on this one. We chose not to add the 5th unit for now since we can expand to that later, but we did get the optional BY5010 Multi Bypass Tray which allows us to print a 13" x 49" sheet. I can tell...