Recent content by snydawg

Looking for a seasoned multi tasking printer with offset experience and Bindery experience Family owned commercial printer in winston salem nc

Have a Hamada H234. Button to engage water roller keeps blinking and cant turn it on or off If you try to run the press the water will not drop completely down to the plate. Have tried numerous things to get it to work and so far no luck.

Any Hamada experts out there???

1st unit water ON button continuously flashes. Can not turn it off. And it will not allow the water to drop completely onto plate. Check all sensors that I am aware of and turned power off and on But still the same problem. Press will idle and will feed sheets however unit will not drop water...

Looking for experienced Press operator. Preferably CD 74 Winston-Salem N.C.

Our Grease Canister broke and I am looking for a replacement. Can only purchase entire assembly from Heidelberg ( 1600 bucks ) Only need the clear plastic that holds the grease. Any suggestions out there?

Looking for Alcolor Bridge roller for Mo Heidelberg I know they are very costly, and trying to save as much as possible on this cost. Any suggestions???

How do you clear faults on a presto saddle stitcher

Blue light flashing on delivery end above counter. Red light on at feeder console. When we engage crank for moving press for changeover from straight to perfect or( visa versa ) and then pull handel back out flashing blue light goes out after depressing yellow light to indicate changeover...

Blue light flashing on delivery end above counter. Red light on at feeder console. When we engage crank for moving press for changeover from straight to perfect or( visa versa ) and then pull handel back out flashing blue light goes out after depressing yellow light to indicate changeover...

Just assuming they have one! B123 with pile feeder and B263 with continuous feed

Anyone out there know where to find an hour meter(total counter ) on the MBO folders

Dave, Sounds like you may have hit the nail on the head, We have NO humidity control in our pressroom and I know that is important. We are in the carolinas and usually don't get the frigid weather that we are experiencing this year. It is very cold and dry for this area. I will make the...

We are having alot of trouble printing on cold stock. piling on the edges of the image. i feel pretty sure that it is a direct result of trying to print on stock that is too cold. Like most places we are basically ordering most of our paper as needed and we don't keep alot on hand thus...

Perhaps there are plenty of people looking for work, but you might want to take into account that you get what you pay for. A shift premium will get you more experience. Unless you are just wanting to fill positions and don't really care about the quality of work.;)