Recent content by streetsnake

Good points, as many of the others have had too. Thanks to everyone thus far. The Xerox sales rep kept pushing that it rips in 10 bit and will provide a much better product?? Also, he said that the fuser temp runs "cooler" versus other press and that appeals to me because of running reloaded...

Not another dreaded, "Help me Pick" thread but I'm still a relative newbie to the digital print world and was hoping the experts could weigh in. I'm a small printer that mainly focuses in on foiling/engraving/etc., and I don't know much compared to many of you. A couple years ago we purchased...

Thanks everyone. I think we got it dialed in for this run at least. I ended up adjusting the “image shift” in the Fiery command station. Once we get the job finished up I’ll try some of the additional suggestions everyone made. I did have one other question. We found we can only cut 2 books...

The others have step and repeat as well. Any idea why theirs would work where the others failed?

I’m new at utilizing imposition software and digital printing. We have a xerox c70 and are trying to set up a job for perfect binding. (Our first). We are trying to set up the interior pages as “step & repeat”, 4-up on 13x19 with the thought that we cut the 13x19 and end up with 4 sets of...

Thank you. That makes sense and will be helpful in setting up the job. Much appreciated.

I was just thinking you have more cut work and you’d have to account for that?

I’m just branching off into digital printing. It’ll never be a big part of our business but it is nice to be able to offer some additional products to our accounts. We’ve been asked to print 5000 cards to be included with our main products. It is a very basic 65# uncoated cover, full color...

Hi Magnus. I just pulled it up. It is showing 3839 x 2909 (12.797" x 9.697")

Thanks Magnus. I’m not sure on your question about pixels. Attached is the part of the cover in question. This is a pic of a printed off cover on glossy 100#C. I used the same image 18 months or so ago on the web and wasn’t very impressed with the resolution back then and that was on a smaller...

Hi everyone. I wanted to see if you could provide me your thoughts. I’m trying to secure a job of booklets. The cover was completed by a graphic designer utilizing InDesign. Part of the cover utilized a photo which is 1296 px sq, 208 dpi. The finished booklet will be 5.5x8.5. I ran a sample...

Would you say imposition wizard is more digital friendly? Like for my xerox c70?

Thanks for sharing. I’ll have to try it out. It seems with Imposition Studio, as I image all software, is geared for offset which makes sense. I just want to be able to easily set up for digital and make adjustments like the placement on the page, gutters, etc.

Today, I downloaded Imposition Studio. Obviously need to learn it a bit over the trial period, but it seems more geared to offset versus digital.

es-2000 When I do the calibration, I run the test print and the colors look much nicer "with calibration" than default??