Recent content by systek

Re: Proofing for CTP Epson Color printers (7880/9880) are going to be your best bet, but remember that the Delta E is different on each machine so custom ICC profiling of each substrate and each engine would be necessary for your accurate color reproductions. The inkjet machines will give you...

Re: Entering the CTP Market NAP001, These posts are all very thorugh however the fact that you only run 150 plates per month does not warrant the money spent on these systems in question. I would stick with something at a lower cost range. 30-40k dependng on the size of your plate. Get some...

Re: Presstek Dimension Moire's I would hope your images are not scans from an already printed magazine...you would certainly get moires from the rescreens....:)

Re: Presstek Dimension Moire's Try running flexo angles. these are 7.5 degree offset from conventional screens. I believe that machine will do stochastic screens. Moires go away with stochastic screens. C-7.5, M-67.5, Y-82.5, K-37.5 These are one set of angles there are more that work fine...

Re: CTP/Processor issues Ok a few things to consider: 1) If the plates are expired... have you tried a new box? 2) Are there any laser power fluctuations? I would doubt your isue is coming from the trendesetter. 3) Check your chemistry, how old is it? What is the condition of the brush in the...

Re: Best CTP for small printing company *The G&J System is not ready for prime time.... Dont waste your time with it. The jetPlate has been around for a number of years, I know of a few people in GA that own one. They seem to like it. I was actually considering ordering some sample plates from...