Recent content by typenut

Also on Katana, you can specify Lead in and run out in Inches, check your settings as previously said

Our 76 em suddenly stopped displaying numbers (red analog ), we had 2 different techs and one says I have to replace 3 PCB Board, the other I need a complete new Board for the Display. I'm at a loss, what is right.?

Installed on 5 machines used for Prepress / Publishing. No issues.

Everything as usual, but once File is proccessed and Laser starts, we have a #2 Bomb? I'm clueless.

Make sure the grain of the stock all runs in the same direction

The start up diskette is keyed to your machine, we have 2 machine here and if we switch the diskettes the machines are not working. We just switched to static drives instead of the diskette. I think if you lost your diskette and you do not have a backup, you're out of Luck.

We combined shops and have duplicate equipment, one is a 1996 Heidelberg Hercules M with a Pro upgrade in 1999, Delta Tower, dongle, and all Handbooks and RIps. Located in US 90249. Anybody can use it? Make us an offer, we need the space.

We use a xitron Rip for our Imagesetter and the Delta is just taking up space. Comes with all manual, Rips (version 7-10), dongles, and the Tower. I'm in California, USA 90249 We can pack and crate to the highest standards ( we print Fine Art and such and ship worldwide). Make us an offer

Navigator Zitron Rip with Rasterblaster which supports our output better than the Delta RIP for the Files we have to do

We switched to Raster Blaster, so this is surplus. If anybody needs it, make us an offer. Delta Tower with Serial connector, Delta rips 5-8 w. dongle and a copy of Delta rip 9 with USB dongle. [email protected]

We have a Tech de-installed Delta tower with rip 5-8 and dongle if somebody wants it, make an offer, We're at 90248 zip

hooked up different g4 from storage, 9.22 clean install, clean lino color install, back up and running. beats me what happened, same machine, same config.

Midle in a job, scanning x pages for a Facsimile job, I get 2004: 6002: Internal Software error. Please reset the scanner or turn it off/on again. ???

Hello all, made Film yesterday and today: turned the Hercules Pro on, the Floppy shows up on display twice as usual and than it's like the power got cut to the display, nada. Where do I start to look?

Yes, nothing, we traced the problem to a faulty on off switch on the imagesetter