Recent content by wango

  1. W

    Ryobi 3304 HA

    The 3304 is not supposed to run a 17 3/4 sheet, or 18"..... but it will!(run slow) Also, color bars can go in the middle or the tail for bleed jobs on 8.5x11 OR from the console you can plug in a floppy from the original file and it will be in the ballpark if the "curves" are set right...
  2. W

    3304HA tail whipping, gripper issues

    Another thing to check that caused me similar problems is to check the large fan belts that move the units, If one or more is worn/stretched it can cause a register issue. Replace ALL of them, they are relatively cheap. Also Buy good blankets, if they are cut differently(one or more angled in...
See more

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….

 
Back
Top