Recent content by yachtsman

  1. Y

    Screen 8000II error code

    ExChange Ld driver 1-3 first, if errod goes to anoder ld slot must rapair driver or buy new If stay the same slot : Check ld dioda, not all together, separately. If all steps not fix this up voltage 5v my company rapair ld driver for 300euro.
  2. Y

    Trendsetter problem

    Turn off the debris in media
  3. Y

    firmware of Agfa Avalon Screen 4300

    Hi Yoana Firmware for laser head or the rest ? Availalbe, i need serial number of You Ctp. But this Soft Clearing all parametr to factory setup. Ever did somone backup FM light Soft? Whas there a breackdown ?
  4. Y

    PlateRite 8000 and Kodak Sonora X processless plate

    Sonora X is moore better plate, work with all fountain solution and forgives a lot sped drum 1000 power 80% Try, realy best.
  5. Y

    SCREEN PLATE RITE 4000 E4e0b : expoure head error

    measure the voltage at the 24V power supply terminals, adjust
  6. Y

    Lotem punches bad

    in the tab hooking the disc format to the hot folder xp
  7. Y

    Kodak Sonora X - DOP issues

    Sonora X must be 90-95 mJ !!! 130mJ ist too high
  8. Y

    Problem with Kodak magnus 400 Q

    Check media cable to laserhead, change for first step. If your laser Quantum need servisshell with Engineer
  9. Y

    Apogge V10 V9

    Someone knows how to add the amount of media in Apogee V9 or V10 - the required password, what method to enter password?
  10. Y

    Screen CTP Change CPU Board

    You must have soft FM light, and do upgrade.
  11. Y

    screen 8300s ctp take very long time load particular size of plate.

    Clean ypur balansers and sensors!
  12. Y

    Kodak Prinergy to Screen PT-R8000 (with ApoServe8 ?) - Need TIFF Catcher?

    Prinergy generates Tiff 1 Bit, If your old Rip Appo server reads 1 bit Tiff treat this lik queue. What communicaction have computer do CTP - SCSI or blue box?
  13. Y

    Azura TE Light Sensitivity...

    Agfa is not advanced Plate. This is negative plate - Write to Print. Put clear plate (no image) to print maschine, and run. No images = clear paper. Calibration If its gets dirty, may be it is problem with water (osmose) or fount - changing water. The best plate ist Sonora Kodak. No problem, no...
  14. Y

    processless plates

    Sonora have much better print volume, and forgives the Plateseeter stability energy. Qyuckly sart and clear fount wather
  15. Y

    Fujifilm increasing plate prices

    Scrap plates are also expensive so the end customer does not lose The film produces agfa and they can do what they want with the price, now it is more expensive than the plates 6,8euro/sqm, The solution is Kodak procesless DITR , that you can do in the CtP trendsetter. But they cost as much as x2
See more
 
Back
Top