Search results

My Xerox Versant drums ordered in March just shipped. If you fall in love with Xerox hardware, consider Fujifilm if they have service in your area. Otherwise, I'd recommend a Ricoh C7500. You can get offline laminators for foiling and stuff.

Quick test might be isolated the offending printers on their own VLANs to see if there's an OSI model layer 2 issue or firmware bug in the printers. You should be able to do that on the switch without changing NIC settings because inter-VLAN traffic should be handled by a router at layer 3...

ebay has some sellers listing Fiery hardware and dvds.

Boggs Equipment might be another source.

We use a 40 year old Bostitch saddle stitcher that looks similar and its build like a tank. I'd recommend it if you can find one for a price you like and put it through its paces. I see them in auctions in the US pretty often. Not sure on UK sourcing.

Is the lower pressure roller and cleaner due for replacement? I just had a similar issue with my V3100, but with increments of 20 270gsm coated 13x19 sheets or 50ish 120gsm 13x19 sheets. Lower pressure roller was losing grip after getting heated up as far as I know. Also try swapping in a new...

Can you change the RIP mode to APPE or out of APPE (Adobe PDF Print Engine)?

What is lacking from your Ricoh 7200's output? An iJetcolor envelope printer would get you a low cost per print, but would run 80k-100k and might meet your needs for print quality and speed, though it is overkill for your volume. The Ricoh 7200 is your least capital intensive solution since you...

If you get one, please share your experience and if it isn't confidential, profit margins using this.

Thanks for sharing! Does the Ricoh C7500 slow down for jobs mixed media weights (ie, 90gsm interior and 200-300gsm cover)?

6 year old V3100 operator here. I've done well over 100k/month when it gets busy.

Not as good as a Versant, particularly solids.

We've been self-maintaining a C75 as a backup machine with days, even weeks of idle time for a couple of years. Partsdrop.com said that they anticipate ample C/J75 parts availability for years because the machines were/are so widespread. I'm considering getting a couple of more for running light...

Also, let us know what the fix is!

if you don't get an answer here, try searching and/or asking in the Fiery Communities. https://communities.fiery.com/s/

We had to do the roller replacement on our 646 for around that amount to address registration issues. Also 1600 for a new guillotine blade.

If you're in the North America, try gmsupplies.com and partsdrop.com. I'd call and ask about volume discounts.

There's an "IQ-520" in their accuropress 400 toner label press. Might be the same as the 501, or upgraded to keep up with the label press' speed. I'd wait for Drupa in a few weeks, in case of new equipment announcements, show specials, and discounts on recently replaced models.

I just bought an Ebay 4100. Hope I don't have trouble getting parts.

If you don't get an answer here, try signs101.com.