Search results

Are you using the Creo RIP ? With the creo I had an isue were the "Print grays using black toner" was the culprit. Also with the Creo, I find that sometime deleting my calibration in the resource center makes a difference.

Hey gang, I went trough my manual and i cant find any info on the minimum height of the blade for a polar 78e, wen I purchased the knife the seller warned me that the blades coming with it were almost done. I need to measure them, to make sure I don't pay sharpening for nothing. Thanks !

Converd ConVerd Paper Products Find a local distributor or Neschen also resells it. Solvent especially Eco-solvent is not the best way to print paper. The product needs to be coated, while with UV inks ... regular paper can be used. Your price will be drastically more. Converd paper about...

Not sure if it will do double sided but i-CUT LAYOUT from esko is a great tool for nesting. You should check it out and get the demo.

What's your bar reduction ? Printing process ? litho, flexo, Gravure or digital ?

What I would do is use Pitstop to remove the unwanted text in the PDF, place the PDF in Indesign and use XMPIE or Darwin to make my variable, works every time.

I'm going to go out on a limb here, BUT if you make a Custom Paper Profile you can change the Image Transfer. My tech could not explain exactly what it did to the machine but To make a Custom Paper "Profile", first log in, press Machine Status, Chose the tool tab, Paper tray setting, Custom...

How about Océ ColorWave 300 or 600 ?

xeikon, one word of advice if you have a full coverage I strongly suggest a laminate.

Epson GS6000, Super quality, low cost of ownership (comes with the RIP software), dose not require ventilation. On the minus side its Eco-Solvent, and dose not last as long a solvent on the outside IF its not laminated.

What are the values you input in the Imposition / Spacing & marks ? I put .25" in the margins and gutter and I never saw this problem.

I always use the "Exceptions" chose type "Inserts" after ... or you could use in the "Finishing" section "Slip Sheet"

LOL ! I did the same thing wen I got my JV3-250SP, good luck.

did you press Remote on the mimaki ?

A long time ago I wanted to do the same thing and read that you need a heated clamshell die cutter to do that.

Can you post a scan ?

You didn't talk about your budget ...

Hi jakewill, first question that comes to mind is what's your budget. In the flatbed's you just named you go from 80,000$ for the rastek to about 250,000$ for the Screen Jet2500UV. Second you need to consider what it is you will print on and at what volume. Somme UV inks are flexible and somme...

Preps Ganging can do this

I have a Compose RIP driving A DT-R3100 maybe my drivers might work on your RIP since their both Harlequin. Let me see if I can dig up that flopy.