Search results

I'm still on ES 14 running Mac OS 10.10.5. It's such a giant PITA to constantly upgrade when in reality there is no true production benefit. I end up only doing it when it is absolutely necessary.

Not to hijack the thread, but I am currently using Oris and find the interface to be super clunky and over complicated. I've used EFI in the past and found it much more sleek and intuitive. What are your thoughts?

Look at the Harlequin options. We purchased our Harlequin based workflow through Xitron. I've used them for years and like them well enough. They call theirs Navigator.

Anyone running UV with them?

Are you not happy with the Kodak Sonora?

You should do a nozzle check before any set of color critical proofs IMO. If the nozzle check shows any gaps, run a cleaning cycle specifically for that pair if possible.

Not nearly enough dot gain. At 7% everything will surely seem flat.

Smoke and mirrors. Now that we've established this "standard" and all of your customers have bought in, forcing your hand, we'll change the "standard" and do it all over again.

There's a lot to read through here, but I assume you've done a nozzle check?

Had that issue too. We have a Xitron Screen PT-R Interface. They suggested replacing the cable from the interface to the platesetter and it resolved the problem.

We had a similar issue with our 8600N-Z. There is a set of rubber rollers at the top of the unit that are involved in the load/unload of the plate. They ship with a teflon tape that becomes brittle as it ages. Once the tape was removed, the mysterious scratches went away. This is supposedly a...

I had a similar issue using the Mac driver for the Epson SC-T5270 36". When printing from Acrobat, the image would turn or scale with no rhyme or reason. Now I open or place file in Illustrator and it prints just as requested. Weird. I spoke with a guy from Epson, explained all my settings and...

Mitsubishi Clear Proof 180 is the answer...must be the 3" core that makes the difference...stable through the entire roll after the initial paper feed adjustment...no issues since.

Yup...Adobe seriously borrowed featured from Artwork Systems ArtPro prior to Esko.

No offense, but that feature has been around a long time...I believe since version 9. It's amazing that you've never come across this before.

make the grayscale a multi channel...add three blank channels (white) with the image being the last channel on the list...then convert to CMYK...you now have a CMYK file with your original grayscale in the black channel only. Copy and paste away!

Try placing it in Illustrator and either embedding it or saving it as an Illustrator PDF and then opening it in Acrobat.

It seems that the answer in in the Paper Feed Adjustment. Just takes a lot of experimentation. Each clear substrate is quite different. Must be a matter of tension, tackiness, etc.

It doesn't like Bonjour...chose the IP Printer and it's fine now.

Yet another issue I'm having with this printer. The utility opens and works, but the Remote Panel just crashes. Anyone else experiencing this?