Search results

Thank you both for your feedback, that's pretty much what I figured, and I should have mentioned these are total ink coverage everywhere which I'm sure would make it even worse. We are currently running these on a huge U.V. web press but the quantities are so small that they cost us $$ every...

I'm running a Ricoh ProC9100 and some on my sales team are wondering if my toner is considered to be laser safe. I believe the fuser temperature is somewhere around 170 C. Was just wondering if anyone else on here has any experience with their toner based output going through a laser printer...

I kind of hi-jacked Manafaith's post about Ghosting problems on his 9100 asking about a print problem I was having with mine. Finally got to the bottom of it. My tech replaced the "Potential Sensor" in the magenta and I haven't seen this issue since. This is located just above the center of...

My tech is here right now and I showed him your pictures, he works on a couple of 7110's and he thinks like someone else mentioned that it is the mylar on the bottom of the transfer belt. How many clicks on you machine?

Are the scratches all over the sheet or mostly in one area? I had a similar issue on some light 80# gloss text stock with heavy coverage but the scratches were mostly on the non-operator side and near the center of the 12x18 sheet. Under the adjustments for skilled operators I ran the "smooth...

I haven't forgotten about following up with this, my tech has swapped out a lot of parts. I have new drums in Magenta and Black, the paper transport belt has been replaced, 2 cleaning units replaced, and all 4 coronas. Even after all o that the print problem in that picture I posted still...

Thank you, that gives me something else I can try.

Thank you Msaeger, that's some great information. I got through today by keeping this mostly out of the print area, tech is coming tomorrow and is bringing me another Paper Transfer Belt Unit. Once we get this figured out I'll post whatever is causing this. Ran about 4000 sheets through...

Actually it's still there but less often and less noticeable. Still nice to have a good maintenance routine, thank you for that. I'll have to get my tech in here next week and get to the bottom of this. Have a HAPPY NEW YEAR!!!

Great information! Thanks buddy, I appreciate it!

Yeah, same spot and on both sides, but again, not always both sides, and some sheets are OK both sides, some have it on one side or the other and some have it only 1 side. And I've seen it on both coated and uncoated stock but most noticeable on gloss coated stock. Was wondering what does the...

I've had it for about 5 weeks. The first 2 days I had a trainer with me (and my boss) but of course I had to keep up with getting production out during this time so I missed a lot of stuff. My boss was with the trainer the whole time so I have to look to him to fill in the gaps for me. It...

Good to know, and thanks for posting what fixed it. I get my "RCOP" training in about 3 weeks so I'll be sure I learn how to do this.

I'm in the same boat here with my 9100, I'm the only one in my tech's area. I can see that easily in the picture you attached. I'm pretty new with this machine so I'm just throwing this out there, have you tried assigning this job which is on gloss coated stock to a color profile for matte...

Good to know Shawn, and also good to know my machine isn't the only one with this issue.

Hey Shawn; As you know I'm really new at this but just thought I would throw this out there. I had that happen twice now on my 9100, once with cyan and once with magenta. My tech told me to actually unscrew that end piece, the one that goes to the back side of the press, and then put it back...

Sorry about that, I should have said it's a 118 gsm stock, so yes it's pretty thin. And I spent a while this afternoon trying to get the face and back lined up. I got to the point where I was going to print one side of the sheet, then load the sheets back in the drawer and print the other...

That is some great information, thanks for sharing that. I'm having trouble right now with 80# gloss text that needs printed 4/4 and the backer registration will be off 1/4 inch in both directions! Only on this thin paper. And sometimes it starts out OK then moves during the run. I think...

Hey Arsen; I've not even been running 3 full weeks yet so I'm sorry I've never done anything with the banner tray yet except run some regular paper out of it. On Monday 12/18 I'm to have my trainer in here so I'll ask him about this.

Hey Anderson; I was digging around a little in job properties and I was close in what I said before about the media tab, but not slip sheets. At the bottom of the page under the Media tab in job properties it looks like you could set that up under the mixed media section. And I was looking...