Search results

Hi I don't have that machine I run a smaller Epson 4000 stylus pro but I have been using compatible cartridges 220ml pigment ink for a while with no issues, I'm in the uk and pay £139 for a full set of 8 220ml cartridges which is amazing value compared to original, they are new cartridges not...

SOLVED it turns out the impression cylinder is worn (the press is 25yrs + years old) increasing the thumb screw for the impression to max has solved the problem, I was so convinced it was the main bearings that I missed the obvious, just wondering if I could file the slot where the thumb screw...

Hi Chock Many thanks for you advice there sure is a fair bit there to go through so fingers crossed I may find the problem. Thank you for the info, have a great Xmas Allan (uk)

Hi Everyone Having 1 or 2 problems with the 3rd sheet coming off the press looking like theres not enough impression pressure so some images mainly the front edge are fainter then the rest of the sheet do you think this could be the main cylinder bearings (my worst nightmare cost wise) I would...

Hi Guys Problem solved, it turns out the vibrator roller was sticking due to ink build up cleaned up and oiled that and I also made slight increase in pressure on the form to plate rollers sorted it, thanks for all the advice and ideas Allan

Many thanks for a few ideas, I have checked plate to blanket blanket to impression strip seemed ok, the oscillator sits on top of two small idle rollers I'll check this out but there is no adjustment as it's just the weight of the roller that sets the pressure, I'm a bit busy at the moment but...

Hi Everyone I have a small offset Hamada 500 SRA4 press running bigfoot feeder and Varn and do 57000 plus impressions per month here in the uk, I've been in print for 30 years now weboffest and now home run sheetfed and not come across this problem before, when I'm printing a largest area of...