Search results

Is your offset press printing to a standard (eg FOGRA) If so, you should be able to match the same standard on the Indigo.

The Magnus does not have a Rip, it takes output from your workflow, that may be 1 bit Tiff or direct print to Expo. The 1 bit Tiffs need to come from that workflow.

Public holiday in Australia and the only times we use the word "vacation" is for its correct usage in the English language (as opposed to North American English) 1: A fixed holiday period between terms in universities and law courts 2: The action of leaving something one previously occupied. eg...

We use the trolley from an old stacker and a couple of benches on wheels with the plates flat in the original boxes

I'm sure there are some old periscope type machines still around, you don't need the electronics or the programming to work for these, in fact I have seen many where the magnetic tape encoder had completely worn out and they were just used as a manual guillotine. There are also a few Eastern...

Definitely consider a Kodak Magnus 800, preferably with Quantum head.

That is correct, the client needs to be the same version as the server, if it's not, then the client needs to be updated to the server version, this is what it means by synchronisation.We had a situation a few years ago where one particular Mac would always say it was out of sync with the...

Windows: . Add the primary server to the hosts file of the Windows client computer: Use a text editor to open C:\Windows\system32\drivers\etc\HOSTS . Add a line that identifies the server's IP address and name, in this format: <IP address><host name> where <IP address> is the IP address of the...

Can you ping the Prinergy server from the client machine?

Plate or paper stuck usually means that the paper pickup tweezers have made too many attempts to pick up the paper. Make sure the rubbers on the tweezers are not missing, are in good condition and clean, and the fingers have sufficient spring.

Industry standard for this is Markztools https://markzware.com/products/qxpmarkz/

I have a Windows installer if that helps

This shouldn't affect the 9800 or 9880 as they are Stylus Pro not Surecolor

I was one of those in house programmers, we were running print MIS systems on Pick and pretty much had to make modifications to make the software do what we needed.

You could use long span shelving, it's generally only 450 or 600mm deep, but you could place two, one in front of the other to create a 1200mm (48") deep rack

PressProfiler is not from Komori, it's a third party supplier. We are currently looking into replacing our Heidelberg Prepress Interface with their solution.

When I did my apprenticeship many decades ago, we learnt the SPANKS formula You should be able to put this into a simple spreadsheet https://printplanet.com/threads/ink-calculation-formula.4982/

https://www.pressprofiler.com/komori-lithrone-kms-and-khs-ai/

Open up the console and see if there is an RJ45 port, if so, you should be able to connect it to your network and submit files that way. I haven't done this with Komoris, only Heidelberg presses, but I expect the process is similar.