Search results

correct. That mark is sometimes cyan or magenta.

If you haven't done so, post in communities.fiery.com.

Is that orange wheel on the inside of the fuser frame cover, 146K91030? I replaced it a couple of weeks ago after losing a fuser belt assembley to 099-339 fuser belt position error. semi-related question Is it possible repair a versant fuser belt assembly after it gets a fuser belt position...

Thanks. I'll check for broken gear teeth. Anything else to look for?

We’re seeing image artifacts on 13x19 270gsm paper, both coated and uncoated. They are on the inboard (opposite operator) side and perpendicular to the paper path. About 155mm apart. 120gsm coated and uncoated 13x19 paper does NOT have the artifacts. Other troubleshooting attempted for image...

My guess is that Canva won't lock out hi-res exports -Might be illegal in some countries for being monopolistic -customers may want to print things not available through Canva/HP partners- ie, foil stamping, tshirts, mugs, spiral bound books with tabs, etc -Printshops may come and go from the...

Xerox's Versant 3100 stock library manager has an option to configure tab banks, which causes the press to ejects unused tabs from a set. I can't find that information for Ricoh's stock management. Do you see settings for "modulo" or "set count" or "bank" in the stock settings for the tab media...

I'd echo what jwheeler says about service being the most important factor in your buying decision. Fujifilm is still building out their service organization in North American and Xerox is having issues, particularly with Versants. The Ricoh 7xxx series seems well regarded.

This can be a good resource for Fiery issues https://communities.fiery.com/s/

My Xerox Versant drums ordered in March just shipped. If you fall in love with Xerox hardware, consider Fujifilm if they have service in your area. Otherwise, I'd recommend a Ricoh C7500. You can get offline laminators for foiling and stuff.

Quick test might be isolated the offending printers on their own VLANs to see if there's an OSI model layer 2 issue or firmware bug in the printers. You should be able to do that on the switch without changing NIC settings because inter-VLAN traffic should be handled by a router at layer 3...

ebay has some sellers listing Fiery hardware and dvds.

Boggs Equipment might be another source.

We use a 40 year old Bostitch saddle stitcher that looks similar and its build like a tank. I'd recommend it if you can find one for a price you like and put it through its paces. I see them in auctions in the US pretty often. Not sure on UK sourcing.

Is the lower pressure roller and cleaner due for replacement? I just had a similar issue with my V3100, but with increments of 20 270gsm coated 13x19 sheets or 50ish 120gsm 13x19 sheets. Lower pressure roller was losing grip after getting heated up as far as I know. Also try swapping in a new...

Can you change the RIP mode to APPE or out of APPE (Adobe PDF Print Engine)?

What is lacking from your Ricoh 7200's output? An iJetcolor envelope printer would get you a low cost per print, but would run 80k-100k and might meet your needs for print quality and speed, though it is overkill for your volume. The Ricoh 7200 is your least capital intensive solution since you...

If you get one, please share your experience and if it isn't confidential, profit margins using this.

Thanks for sharing! Does the Ricoh C7500 slow down for jobs mixed media weights (ie, 90gsm interior and 200-300gsm cover)?

6 year old V3100 operator here. I've done well over 100k/month when it gets busy.