Search results

Can Anyone help me please. I have a screen 4100 that vibrates when the drum spins up .it sounds horrible and affects the image . It’s better when drum speed is reduced but still there . The belt has been changed as the balance blocks and clamps . It rotates smoothly by hand . No errors ...

Hi All . Had a customer contact me about this error . Is it an engine to rip issue . Don’t know too much about the dimensions 400 .i Can’t locate a service manual for one in the uk . I used to work for Abdick back in the day but don’t know anyone from Presstek or mark Andy now as they’re all...

Hello friends. I recently came to a problem where the Fuji .15 plates are actually .143. This seems to be causing a quality issue on Presstek dimension 400’s . The .3 are ok and so I’ve been told they do not do a .2 anymore. Fuji said the issue can be rectified by focusing the ctp . Do any of...

Hi all . I’ve got parts manual for all the screen range but I’ve never been able to get a parts manual for the 4000/4100/4300 etc. I’ve mostly managed to be able to get by with the recommended parts in the service manual . Has anyone got a parts book pdf or can I buy one ? Please. thanks in advance

Good day all . Got this error on 03 board , swopped board to position 4 now displaying 04 board is at faulty so looks like a expensive fix . The machine was working fine then put into storage for a year then when I tried it I had this. Can these boards be repaired or can the error be bypassed...

can anyone help me on a Kodak 400 . Need to transport it but not sure if I need any transport brackets or anything to lock down for safety. Any help please thanks

hello all . Wonder if you can help me with how to disable second sensor on the exit conveyer . The customer had a glunz and jenson wash unit connected to the suprasetter but doesn’t need it now he’s using Fuji zp . The wash unit hasn’t been switched on but is still cabled to ctp. A previous...

Hi all. A customer has gone onto Fuji process less plates and needs to remove the Agfa vcf85 from the Heidleberg. Is this strait forward as unplugging a coms cable and trying it or do I have to change a setting in the suprasetter to make it not connect to the Agfa. Thanks in advance

I’ve Just been told that Kodak ,Fuji and Agfa will be discontinuing UV plates by the end of the year and already my supplier struggling to supply B2 size Fuji plates. A plate dealer here in the uk said it may be possible to convert the Agfa Palladio 2055 to thermal by changing the laser ...

has any of you guys had this . I’ve not visited yet but the plate images half way and then fails mid scan . customer has spoken to a Heidleberg engineer on the phone and they say it’s a board or diode but surely that would error before starting to image . I’m thinking more cable fault ?

Morning all. Just helping a customer with a Heidleberg badged creo . He’s getting faint lines on the image. Barely visible . No errors and in the direction of scan. I’ve cleaned the lense and lubricated the lead screw but it’s still there. Any suggestions please

Hi Guys. I never managed to get a service manual so I’m going to go in blind and see if I can help the poor guy. He’s using Fuji plates and they worked great for months but now the plates are wearing on the press after 100 sheets. Both Ryobi and Heidleberg. Same fount and inks. He’s run wormdens...

Hi guys. Ive been asked by a supplier if i could help calibrate a presstek dimension 400 . im a ctp tech but never used this machine. if its harlequin im ok. do any of you guys have the info on adjusting expo and optics cleaning please. thanks in advance

ctp tech specialist , 20 years experience ,role involves training engineers , fault finding ,installations ,phone support. Including international travel .worked on dianippon screen, esko analogue and digital ,dpx platedriver . itek /abdick ,Heidelberg and more. also originally a press engineer...