Search results

  1. C

    door lock part for Screen PTR 8300

    You take old part as a template. Work with some tools to get proper shape. I see, that you have no idea about that, maybe you could find some workshop, ironworker etc and ask to duplicate that part. Chris
  2. C

    elantrix 125 sx manual

    ...but no service manual. Thx anyway.
  3. C

    door lock part for Screen PTR 8300

    DN+70510786 CAM SHUTTER OPEN/CLOSE 70510786-00 SHUTTER DRIVING CAM POM 28.19*25*9.5 Ask dealer of Screen, Agfa, Fuji. Better to DIY, it is easy to make with file, sandpaper and piece of hard plastic. Chris
  4. C

    Accento E - Service Code

    4302 ent ok
  5. C

    bypass for processor not ready

    You can "simulate" that processor is hooked and eject film to the back. You know how to enter "hidden" menu? Chris
  6. C

    PlateRite 4300S head error

    I would check -5V and +15V output under load with the oscilloscope for voltage ripple. I would measure the same on machine head.
  7. C

    Avantra 44 nip motor problem

    It is not an issue of SDM module for sure. Tested with 2 other 100% functioning modules. Broken SDM does not give "apis command error" message. Chris
  8. C

    Avantra 44 nip motor problem

    24V to SDM comes from DEC via flat cable. It is present. Anyway, I will try another DEC next week. Chris
  9. C

    CTP affordable recommendations

    Automatic plate loading raises cost, limits choice range. Screen plate setters are well known on the market, no problem to find spares or serviceman. Chris
  10. C

    Avantra 44 nip motor problem

    Hello. I have a problem with nip roller motor which is not working. Checked so far: 1. Motor 2. Motor cable 3. SDM 4. Flat from DEC to SDM. Still no 24V on the motor, nor on SDM output. Unidiag gives "command error" when testing this motor. Avdiag gives "APIS command error" when testing this...
  11. C

    Phoenix 2250 OLP problem

    Little update. Problem come and go. I inspected everything I could, machine works till now. 260 is showing up, next minute is gone. Showing up only when idle. Never showed up whenl film processing. Customer just lives with that. If someone could add anything after 4 years, would be great...
  12. C

    I am looking for a electronic board for basys print uv-setter 57 f ctp

    Everything you ask is on provided pictures :)
  13. C

    AVDIAG Software

    https://www52.zippyshare.com/v/rh5rCLhK/file.html
  14. C

    Re-Load Plates????

    You can reload. I've done it many times. Chris
  15. C

    Finding Good Employees ? Are We Crazy

    Does not mean, that's a good salary. No sh1t, here it is a standard, not mention full medical insurance with dentist care :) Maybe it is a time to rethink? Chris
  16. C

    Agfa Aspire plates

    Depends on power output from that Mako...
  17. C

    Simple Tiff Catcher/Shooter

    Raster Blaster, any second hand Harlequin rip, even v6 can do the trick.
  18. C

    SCREEN PLATE RITE 4000 E4e0b : expoure head error

    Clean optics. Replace worn lasers if needed.
  19. C

    screen 8300s ctp take very long time load particular size of plate.

    Yes, right, touch screen, home, whatever we could name it.
  20. C

    screen 8300s ctp take very long time load particular size of plate.

    Open right side, make a good quality photo showing drum side. I do not have a machine nearby to do it. Chris
 
Back
Top