Search results

Older than QXD 3.3 Can ONLY convert w/Quark Xpress 4 and below.

The shop where I had the exposure (pun intended) to dot etching was definitely agency connected. Early 90's.

That is so cool. I've been around long enough to have worked with someone who dot etched. But I had never seen - or HEARD OF - a MacBeth Chromocritic.

Hi - hope you got it working. It appears there are no specifics to your question - there are a plethora of possible products. * This is in the Kodak forum though. 1. No 'workstation' software named. 2. No specific 'output device' named. Etc.

Not by accident.

Bombs Away Hoof, Track, and Stinker Failure to Communicate

Might help to know where you are n the world. :cool:

I really like the way you've distilled this reference information. I cannot agree with this statement: "The prepress and press worlds are some of the worse (sic) misusers of terminology with the all too frequent resulting confusion in sales, marketing, specification, and production" I firmly...

They installed ours so poorly it took us three months to get them leveled and straight. Because the jams just kept happening. And then voila! all fine.

Ah yes. The opposite of the statement I made. I implied that 'If you are measuring it then you should be able to fix it' and stated 'if you CAN'T fix and are measuring it then why are you measuring it ?' In plain english I never implied you 'shouldn't measure if you can't fix it.' Thats some...

We had one installed in the last two years from the East Coast Mitsubishi Representatives (Contractor). We did however put in a new and different branded ink fountain control system. The Console computer and install ran 10K+. The Ink system was 10K+. We got into all of it for less than 25k which...

D. None of the above. "Your plate verification measurements have deviated from the set tolerances." If there is a flaw in the plate production process and you don't have internal control/repair options for that process why/how are you measuring it? - Over and over the production manager who...

LOL - its your machine so it's your problem. hahahahahaha

Hi - We had problems with registration that led to your type of issue. Try turning off the lead edge detector / registration sensor. The machine MAY be trying to "straighten" it. This usually worked with longer sheets. Admittedly then sometimes they moved up or down machine (lead edge...

No downside. Just up front cost.

I run Imposition Studio instead of Quite Imposing. Everything else is right there.

1. Customers are mostly uneducated about printing requirements/specifications. The expense of educating our customers is a cost of doing business. Preflight software does not typically address customer education and would become moot if it succeeded at the task. 2. Automation is wonderful for...

Hi - here is an option or two. I use a number list generator that can skip / jump per list. Six spots on the sheet? Six lists, total divided by six, make six "page areas" w/ six merge boxes. Away you go! Cut and stack. :) or As I have posted before: Imposition Studio has "Variable Data Printing...

Ran long edge for years no problem. Big deal is - the ART - size and orientation. MAKE SURE that the PDF you send is the right size and orientation. The Xante software has great options to position the image on the page.

Which is when we re-quote the job and put in an annoyance fee.