Search results

Black Onyx from H&B or Ultraflex from Flexoconcepts work well. Needs to be plastic for best results.

I have been making grit type uv coatings for years. We have many different terms such as Thermo puff, Raised, Sandpaper Grit, Profile etc. Primarily for in-line applications on sheetfed presses. Through the years we have been able to fine tune these formulas and the equipment for optimal...

Water is ok if you are goingto use the can of ink within a few days. The can will rust quickly and cause other issues if stored for longer periods of time. An ink oil like magie 47 or 52 will work too just pout it off when you go back to it

I have a customer which uses 10.5 bcm on a Komori some times i hit litho + coater unit, sometimes 2 hits ltho + coater unit. Primarily lenticular. Our product # UV-5056 [email protected]

I am the technical director at Metrocoat Graphic Supply Co. in Chicago We have a wonderful Soft Feel Aqueous Coating MWV plants run it on cosmetic and media pkg. 1-877-430-COAT my email is [email protected]

Try Metrocoat AQ-2009-XL, guaranteed to reduce marking or rub problems

If you would like we can provide the varnish and the coating The two work together as a system to produce maximum reticulation or contrast [email protected]

You should try a spot "clear" foil stampinig process

Occassionally we see an embossing of the ink image area when aqueous coating. We know paper quality and weight influence this problem. When we knock the coating off it does not happen. Any input?

A low VOC silver ink or a silver made with less metal (aluminum) content will often help How quickly the job was backed up will also influence ghosting, as well as too much heat The fact that soft feel coating was used it inherintly has a very very dull surface which also can influence...