Search results

QM 46 Leaking QM 46 Leaking In our case it was the tray itself having too much slop I added tape to the front so it would not tip down and the problem was fixed - tried everything else caps, setting etc.

xpressjet used to be jetplate - I am not a former employee but one of many customers that was basically ripped off - so I would not use this company no manner what they call themselves.

I would not use JetPlate if I were you - we spent over 50 grand and had nothing but bad support - and as of this point I am unable to return it - the guy is a major crook - you can use polijet on any epson -software is 500.00 If you need metal try Glunz & Jenson or if you need long runs you...

Consider Poiljets product call Liam Clarke at 814-414-0026 it is not metal and works with regular epson ink [email protected]

I would consider Polijets product which will work with any epson printer - you have to use regular ink - it is not metal but give this guy a call he is very helpful - Call Liam Clarke 814-414-0026 [email protected]

Another Solution Another Solution JetPlate basically left us high and dry - I would consider another solution and that is to try PoliJets product - it is not metal but it will work with any epson printer - call Liam Clarke 814-414-0026 [email protected]

Do not buy a JetPlate Reasons - No Service and your heads will eventually clog on your Epson / Jet Plate Printer. Remember Epson is not affiliated with Jet Plate -

I would stay away from JetPLate - For these main reasons - Bad Support, and Trouble with Cartridges which are only supplied by JetPlate. No returns, and you must use Kodak's Craftsman Plates only.