Search results

I would try turning up your cylinder pressure via the dial behind the hand wheel. You can also try putting a bit of packing under the blanket to build it up and creat more pressure for the perf. Don't forget litho perf will wreck your blanket so use an older one.

xante xante I have used the Myriad plates with Xante and GCC Elite (basically a Xante with a different badge). I have had similar problems but i have never looked down the ink angle. I have basically found that the heat fuser roller in the machines loses its heat as it gets older. I used to...

Hi I am not a print technician like the other guy just a printer with AB Dicks so he may be able to give you some technical advice. On the back of the press at the bottom there should be a box that your electronics goes into. Inside there is a 5V dc power supply (not a DC motor). This power...

Hi Kevin If you have found the forms adjustments then you have got you what you need. Is passed to the form rollers from the ink well by a combination of Distributor rollers and ink rollers that hold themselves at the right point by the weight of the rollers sitting down on them. The only issue...

The CD stands for chain delivery. I don't really think there is a straight 360. A 360 with a chute delivery is generally refered to as an AB Dick 350.

are your conveyor guide wheels off the sheet when the sheet jogs. The sheet should just pass off the wheels so that they are a bit of a back stop and they don't interfere with the jogging

Hi RobbG If I have got it right from memory the hamada 611 is the small footprint machine that feeds paper direct into the printing unit rather then along a small conveyor belt that the traditional hamadas did. If that is right I remember that they were a cow of a machine to get to feed nicely...

as to the spraying yes spray the whole plate. You can spray areas of the plate lightly with the sprayer as a temporary measure but remember you have no molleton rollers to pick that up like a heidelberg, hamada or multilith so it will take longer for the ink to recover it full "black black"...

re ab 360 lockout latch re ab 360 lockout latch Hi Mike Yes the lock out latch is meant to take the pressure of the top roller at nights. There is a large top oscilating roller down under the fountain rollers It is important to keep pressure of this when not in use because it sits directly...

new guy ab dick 360 questions new guy ab dick 360 questions Hi washington mike You should invest in a plate punch if you don't have one which will save the plate coming off problem. I als used to spray a bit of that craft store adhesisve apray on the paper and laser plates to get them to stop...

Re AB 360 problems. Re AB 360 problems. Hi Washington Mike I have run ab Dick 360s since I was a boy and whilst I don't have one now I think they are one of the best presses for a beginner. To begin with, the copper roller you describing is an aquamatic system. Common in ryobis and iteks as...