Search results

I'm just getting together all the bills from the mechanic. He and I will have a discussion. He was the one who ordered the rollers. Glad problem is resolved, now I can have a talk with mech. regarding bills. He's a good guy and we've had over 20 years of doing business so I'm sure it will work...

So far so good with the Hamada. Mechanic installed new rollers and so far no problems. Looks like the rollers were always the problem. He had Syn Tac make new set of dampener. He installed new dampener rollers and so far so good. Mike

Al, I have checked each dampening unit. They each have an "outward" rolling nip between the pan and the metering rollers. Outward as opposed to "inward" rolling nip. Mike

Hamada Cresline problems Hamada Cresline problems I've been through all of the fixes mentioned here. All good suggestions. Also asked mechanic about clutch in water unit. Checked out OK. Pan isn't contacting rollers. Pan roller only turns in one direction. Crestline unit was made square after...

My mechanic was looking into alternatives. I'll mention Lith-o-Roll. Hopefully he'll answer my call. He's almost as frustrated as I am with this. I guess I'm more frustrated because I have the bills!

Thanks. I'm also going to see if Boetcher makes or can recover my cores. I use them on my Komori and we've been happy with their rollers. Mike

Thanks Al, We've set and reset all of the roller strips, ink & dampeners, including intermediate rollers. Everything is in spec. I still have the original Crestline card showing the 4mm stripe. Nice even stripes. We changed the plate cylinder bearings when we split the head. Also changed out...

Thanks for the reply Al. Water pan, bottle & hose checked. While running we see no water spitting from rollers. All roller strips checked & re-checked. All things point to a problem with the roller compound. We've been through 4 rollers so far, but if they're all from the same lot # we're...

Anyone run into this problem? I have a Hamada 665 with Crestline damps. The satellite head developed a water problem. Too much water on the edge of the plate on the operator side. Have totally rebuilt head. Bushings, bearings, rollers. Problem remains. Burnt out 3 water rollers. 2 within just...