Search results

  1. P

    Prinergy - intermittant horz black lines on proofs

    intermittent lines intermittent lines Generally speaking horizontal lines are a memory issue. Memory registers load with data and outputs it at regular intervals based on a clock. If you were to put a screen tint (consistent data) in the image area and try that, it should give you a...
  2. P

    Problem with plates fading

    plate blinding at on edge. plate blinding at on edge. Try turning the plate 180 degrees through the processor to see if the problem stays the same (processor) or moves to the opposite side (CTP).
  3. P

    Problem with plates fading

    Assuming metal plates: Make sure developer temp, agitation is ok. No foaming in dev tank, pumps are working (replenish and circulation), rinse bar is working well (clean jets) and that the finisher is at the right level, and spraying properly. Machine is level, no kinked hoses, the list goes on...
  4. P

    Moving a Herkules M

    Take off all covers around the perimeter of the machine. At ea.corner you'll find a small plate with a hole. remove the plate w/3mm allen under the plate is a threaded hole for shipping bolt, thread bolts in (4X) put plates (shipping) back on (w/3MM allen) two lock nuts secure the other end of...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….

 
Back
Top