Search results

Its all about the Print Samurai and Ninjas.... (sorry... daydream...)

Strange a guy i know runs silk cover/text no issues.... have you gone back and tested the silk by chance? Also, what settings were you using for silk cover?

Is there such thing as having the ability to change the heat balance across a fuser roller? (ie: one side is fusing the other side is not fusing as well?) and When the KM c6501 starts up, does it store or apply any kind of memory regarding the fuser? (some one mentioned this and I had never...

you have 12pt jamming? are you running short grain sheets? My tech has mentioned that not all 12pt is made equally... its possible to get short grain 12pt that duplexes, and i'd suggest looking for an assurance throughput guide. Not sure as far as your software is concerned... would have to be...

Thank you so very much! Had not checked back in a while... this helps immensely

1. Have you had many feed jams in the past little while. 2. How long ago (clicks maybe) has it been since your fuser has been serviced 3. How long ago since you've had a Maintenance Cycle 1? (its usually 200,000 clicks of a 8.5x11 equivalent sheet size). tgrec is correct about the...

1. Have you had any paper feed issues 2. what are you using to clean your rollers? 3. what colour registration adjustments have you made? (do you have a copy of the manual and are you aware of these adjustments Sorry to ask the simple questions first. Just want to make sure.

stupid set of questions: 1. have you checked a colour band test sheet for density unevenness across the page? 2. what kind of rip/program are you using to send jobs to the machine? also, in the print driver settings... expert colour mode.... are you using source GCR? as far as spot colours...

So figured out some of the skew.... The dual entrance rollers.... hold one finger on the bottom rubber roller and see if the top white rollers give at all... check both relative to each other... if one sticks and the other turns, you have a bent frame or unbalanced roller. I am still getting...

I am currently looking for a KM c6501 Assurance Throughput Guide. I have contacted KM numerous times and attempted to get one through the company currently services our machines as well as sells these models. I'm starting to think i'm looking for a black cat in a dark room that isn't even there...

Issues pertaining to the original thread: To keep in mind: Each stock that we use has been registered after Machine Adjustments have been setup - Uncorrectable machine skew regardless of personal efforts and technician's efforts in the Machine Adjustments on paper from 75gsm-256gsm (worse as...

marketing green is simply another sales gimmick. efficient technologies in general only are taken into account if over all costs are measured in the economy. If dumping toxic waste is measured as an economic loss (and those losses are not just "dumped" on nature) then those who seek...

DCG West pretty much laid out much of the prep work. I've always seen envelopes run on high speed setting. Running any large batch will often mark up the fuser belt which tends to "heal" afterwards if you give it time and runs some larger format product through. I've often heard of operators...

anyone know if there is a similar patch for the KM c6501? I am trying to print on centura gloss cardstock and on heavy coverage the toner will flake right off the page when using the same scratch test we use for UV coating. (infact the UV and the toner came off... then we investigated just the...