Search results

The back gauge is now out by 1/16 th of an inch. How do I calibrate it? It's a polar 92 EMC - Monitor. Almost back in action!

Figured out a problem we've been having but now need a parts manual in order to get replacement relays. Does anyone have a parts manual for a polar 92 EMC Monitor cutter - circa 1994 I beleive.

Good advise. Unfortunately we're a long way from Ohio. Northern Canada. 1600km to the nearest city so whenever we can we need to sort things out on our own. In fact, part of the problem may be that the monitor is not original and may not be displaying the error code. The field of view is...

I see in an older post regarding a reference point issue on a polar 92, that the problem was solved by adjusting the position of the switch that registers the furthest position of back gauge. Could this be related to whats happening here. There is no error code, or message. The machine simply...

Doesn't seem to be the wire. I inspected the connections and the wire itself for wear. I was running without an issue for a couple hours but now the same problem has resurfaced. I don' believe it is a brake issue either as sometimes it goes well past it's intended position. And at a slower pace...

Hi, and thanks for the feedback. It is a Polar 92 EMC Monitor. There is no error message being displayed. The program is halted and there's a beeping to alert me to the error in position. I am just into work now and will look into Risu's suggestion.

How do I adjust the brake on a Polar 92 cutter. The backgauge has started missing it's postion. I've had the machine re align itself (Scan reference point) but when running a program , it will get interupted because the position is not being reached. Usually I can acchieve the position...

How do I block out the "No." on my numbering machines when numbering on the Platen? I've seen it done with an arm attached somewhere with a piece of mylar taped to it.....any tips?

On a polar 92 EMC - Cutter . If the clamp time is reduced using the dial on the right of the control panel, is it possible that the clamp doesn't achieve the proper PSI before the knife contacts the paper. I had thought that shortening the clamp time would not effect the amount of pressure but...