Search results

Also one thing, our machine vibrates too much. The drum where plate rolls shakes after around 50% expose task. Also, there are no screws at the bottom portions on the base of the drum. Shouldn’t there be some bolts holding firmly the base of drum? I can literally shake the drum a little bit with...

The lines appear on the same side. Does not make any difference whether I rotate or not. Must be the grease issue again because it was running fine for about 200 plates before those lines started to appear again.

Cleaned the v-groove and rulon pads. Also greased it. Worked fine for a week but gradually those lines are starting to appear again.

Marc.Ram we bought the machine in 2014 and havent cleaned the Vgroove till date. Will ask my Tech to inspect on Vgroove and Rukon pads and let you know if the problem gets solved :)

Hello guys, sorry for the late response. The machine we are using is Kodak Magnus 400. Plate processor is Glunz & Jensen Interplater 85. We are currently using chinese plates. Those lines appear on the left sides only. I don't think its a processor issue because those lines appear where they are...

I have same problem. In my case, wierd thin vertical lines appear on the left side of the plates as you can see in the pictures I uploaded. We have been overdeveloping the plates to get rid of those lines. When developing, those lines are not visible with naked eyes but soon we start printing...