Mitsubishi 1G/3H Multi Communication Error

[Nutech Shroff]

Hello,

We have a Mitsubishi 1G and a 3H - both are about 12 years old not. We have been getting Multi communication error on the machines. The technician says the problem is with the Slave Cards.

Does anyone have these cards available or knows a cheap source for these card? I need about 4 of Slave Card A and 4 of Slave Card B.

Regards,

Nutech Shroff

 

[Nutech Shroff]

Slave A (RKD 0169A) PCB

 

[IchibanDenkiban]

Correct Diagnosis

Correct Diagnosis

Multi communication error is caused when the receive data of the SX communication drops too low from the send data.

The SX slave has a monitoring function within the PLC on this type of communication.

There is a specified value for this. Each slave board has it own value within the PLC program and this should be checked,it will tell you which board has the issues.

If you need the RKD0169 we offer a service exchange for this product either slave A or B and always have one each in stock in the UK.

 

[Nutech Shroff]

What do you charge for these cards?

 

[Nutech Shroff]

Hello,
Can anyone help me with the sourcing of these Cards?
Regards,
Nutech Shroff

 

[Nutech Shroff]

Thanks for your prompt response.Our in house technician has narrowed down the problem to one of the Slave A card in the printing Unit. We would like a price on Slave Card A and Slave Card B also and confirm availability.

Also do you keep other electronic Boards for Mitsubishi machines. Would appreciate an Urgent response.

 

[Francois]

@ taiheiyo: we are interested in Mitsubishi electrical parts source. Can you contact us at: [email protected]
Thank you.

 

[Francois]

We are interested in Mitsubishi electrical parts source. Please contact us at: [email protected]
Thank you.