POLAR 66 Manual Needed

[Louisms]

I'm in a bind!
I need a workshop / parts manual for a Polar 66 Guillotine.
Can anyone help?

Thanks!
Paul
Dublin

 

[Buntpapier]

I would try to find former POLAR service engineer from the Heidelberg agency Millers. Some are on there own now.
Buntpapier

 

[jimnick44]

i have an electronic version. you can email me at [email protected]

Jim Nicholas
Director of Operations
Batson Printing
Benton Harbor, MI

 

[Buntpapier]

There is more than one 66 version. This go’s by software version and machine configuration:
66 V1.2
66 V1.3
66 V3.0
66 V4.0
and 66X
In North America and Europe the operating manual has to fit to the machine because of safety requirements. If the knife change explanation is not the correct one the operating manual is not good.
For normal programming it will work not in all cases as well. During 15 years of selling the 66 many things are changed.
Buntpapier

 

[quadraernie]

i have
[email protected]
quadraernie