Alois Senefelder
Well-known member
Hello fellow Lithographers,
This is a common problem on all types of "Squeeze Type Dampening Systems" such as
Alcolor, Komorimatic etc
One common way of avoiding this problem - is to extend the length of the Rubber Metering Roller, slightly longer than the Press Inking Rollers, also try a Collar running "Flush" against the Chrome Pan Roller and the Mettering Roller.
See the PDF
"I hope you will find it of interest and value"
Regards, Alois
This is a common problem on all types of "Squeeze Type Dampening Systems" such as
Alcolor, Komorimatic etc
One common way of avoiding this problem - is to extend the length of the Rubber Metering Roller, slightly longer than the Press Inking Rollers, also try a Collar running "Flush" against the Chrome Pan Roller and the Mettering Roller.
See the PDF
"I hope you will find it of interest and value"
Regards, Alois
Last edited:
