Latest activity
-
I stole it off of an old straight shooter envelope feeder that was broken. It just leaves the stack lifted at the tail edge so It can... -
Nnamelessentity replied to the thread Intec SC6500.I stole it off of an old straight shooter envelope feeder that was broken. It just leaves the stack lifted at the tail edge so It can...
-
-
jwheeler replied to the thread Intec SC6500.I'd like to see a photo of that. We've experienced the same problem you're both describing.
-
Nnamelessentity replied to the thread Intec SC6500.We kinda of had the same issue. It felt like we got trained by a salesman rather than a tech/operator. We also found making kind of a...
-
DDYP replied to the thread Duplo DBM 350.Welcome to the world of paper wrangling. A stable environment (temp and humidity) is your best friend. And clean you belts. They can get...
-
jwheeler replied to the thread Intec SC6500.Glad you figured it out! As a side note, I'm not sure if this has changed on the 6500 model (compared to our 6000 model) but we go...
-
jwheeler replied to the thread Envelope Printer Recommendations.Seeing @Debshort respond to the old comment about my post, I thought I'd provide an update as a user: We've now had the Postmark 1170...
-
SStickman42 replied to the thread Duplo DBM 350.Have you tried increasing the width of the jogging guides in the stitching area? There's also a "Stitching Side Release delay" setting...
-
Cchrisio replied to the thread Duplo DBM 350.Thanks for reminding me! It plowed through 50ish 16pp booklets this morning that was 250gsm cover and 120gsm inners before starting to...
-
PPennypicher replied to the thread Duplo DBM 350.Well if it does it again check out those things. Sorry for the heat. I hate anything over 80 in USA.
-
We just started to notice some striations in the image of our Sonora XTRA plates that show up on the print. You have to look under a... -
-
Cchrisio replied to the thread Duplo DBM 350.Came in this morning to try this and the damn thing is working! it is slightly cooler today at only 24degrees which makes me think as...
-
Good Enough................. Reminds me of back in the early days of computers, when we were discussing response times. Things were... -
SSirSpeedyCVA replied to the thread Large Format Production job available.Charlottesville Va
-
MacTwidget replied to the thread Large Format Production job available.Where are you located?
