Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Floor load weights for 29" press (Ryobi, Heidelberg CD, Komori)

Collapse
Konica Minolta
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Floor load weights for 29" press (Ryobi, Heidelberg CD, Komori)

    I was wondering if anyone might know the floor load weight requirements for a 29"-30" 5 color+coater press (2006 or later). Just doing some preliminary looking around used machines and trying to gain info as to floor load requirements. I am positive I would need to poor a pad as my floor is presently rated for 250lbs and it is built on piles.

    Any info is appreciated.

    thanks

  • #2
    You should be able to get a site preparation guide from the manufacturer.
    You will need to have a slab poured to the manufacturer's specification, usually about 24 inches thick, some machines also require maintenance pits to be included.

    Comment


    • #3
      ryobi 755 is 27' l 9'10" w 6'2" h 48'500lbs u.s.

      Comment

      Unconfigured Static HTML Module

      Collapse

      Static HTML Module Content
      4OverStandard FinishingDuploSmartsoft (Presswise)KBAUltimateTharstern
      KBAKBA

      What's Going On

      Collapse

      There are currently 2929 users online. 56 members and 2873 guests.

      Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

      Working...
      X