Recent content by adragfa

Does anyone have the Screen PT-R8000 II plugin for PrintStation 2 ? (Old Compose) Thanks

I have a presetter 74 giving the 36 Volt error measuring 0 v with the Diag tool. The electronics LMB80 36 v fails only With the user interfase same erro votage error. The carriage and mirror works fine. The Power supply is tested and has the 36v. is OK But still some diag routine is...

Yes, Carraiage is not moving smoothly I agree. Dirty rails or bearings, encoderm flat cable... check is it is always in the same position of the carriage. good luck Adrian

your email address is bad ? its comming back with error

HI thanks for your comments, but Bridge Buffer Board is installed in machine config, also the machine is using the bridge to transport the film to the buffer then to the agfaline. Could be the bridge buffer board anyway some hardware/software hunging the communication.... Thanks Adrian

Hi, Thanks for your help and comments in the agfa Forum When you say PCB firmware are you talking on the Agfaline processor ? Do you have the software to send it to me by email ? and instructions to downloaded ? I assume I can downloaded by the Androdiags right ? Are those firmwares the...

Avantra 44 Buckle film inside drum when loading Avantra 44 Buckle film inside drum when loading Hi Guys, I have a random problem, the film is loaded till the end and just in the last second the machine is like jumping the supply roller and the take up roller to the inside direction the drum...

Help, I have random communication problem from an Avantra 44S connected to an Agfaline OLP. 4 or 5 times a day is loosing the communication with the Agfaline giving Error code 58. The only way to recover is restarting the Imagesetter ONLY. I reloaded the OCP flashrom software but is stil the...