Recent content by bcolour

Thanks PricelineNegotiator, I saw this article previously, but it just describes only one of the issues without mentioning productivity mode. According to the CED Productivity Mode can be used for grammages above 176gsm. But we get toner peel off, poor toner adhesion as well as mottling. So...

We are an Australian print bureau with a J75 with over 2 million clicks and are having serious problems with: registration, poor fusing, and use of SIQA tool to correct registration and toner fusing. We have had regular technician visits and very little seems to change. The most pressing...

In my experience, the RIP will use a certain icc profile: my wide-format RIP likes icc profiles which use the Lab profile connection space or PCS. So I had to find a way to create icc profiles using the ES-1000 and Fiery's Color Profile Suite and then change the PCS inside the icc profile from...

I have the ES-1000 licensed to my Mac. I have used it with Color Profile suite and also my wide-format RIP where I need to re-linearize inks. So the ES-1000 will seem to work outside Color Profile suite as long as the device is licensed to one OS. But just recently I installed VMWare to run...

I have the software and it's got all the bells and whistles. The final icc created uses the XYZ pcs (profile connection space) instead of Lab pcs. Lab pcs is more common and in my case I have a wide-format printer RIP which only reads Lab based icc profiles. I think there is a workround to...

Have you tried the Tile option instead of the Cascade option in Acrobat. Under the Window menu you can choose Horizontal or Vertical tile. Either way you get to see two pages at once. You can adjust the zoom level for each to match.

icc profiles and printer drivers icc profiles and printer drivers An icc profiles made by Chromix will be a profile for a particular paper you will be using on a particular printer. So if you had three types of paper you were going to use on a particular printer, then you will need three icc...

In your case, you can edit source and target profiles, given that maybe Color Profiler is not activated. In CWS, go to Device Center, Resources, then click on Profiles. You will now see all the icc profiles the the RIP has. Click on either a source or output profile that you use and which...

If your problems with Command Workstation are that bad, you may need to uninstall and reinstall making sure your workstation is functioning well and hard drive space is adequate. Transparency issues you're having are common. Some of the solutions are get the latest service packs for your...