Recent content by Bloomfield

An update: After a visit from an engineer, we seem to have solved some issues with one simple tweak. An ongoing problem with transparencies and this texture problem were improved greatly by reducing the line screen/halftone mode from "200 dot fine text and graphics" down to 175 dot

We've had colour shift on some jobs without self-checking recently.

Thanks for the posts and apologies for the delay in replying, We've had little success with anything textured, conqueror laid for example. As I posted previously, we have tried altering the paper transfer current but it didn't make a great difference. I've tried some of the problem stock...

Hi, thanks for those replies. We have tried textured but it didn't seem to make any difference. We've also tried increasing the heat and voltage of various options in the advanced menu but to no avail. Had a slight improvement printing the image 'one up' in the center of the sheet. (1 A5 in the...

Hi everyone, Having some ongoing problems with this machine and printing on various textured materials. Have tried various things including increasing the paper transfer current but with limited success. Has anyone any tips or tricks for improving these results? Any help would be great...

Ok, thanks. So maybe force a self check just before running a colour precise job in the a.m.

Hi and thanks for replying so quickly, We are still getting to know this machine. I pulled a proof of a job at 4.30pm yesterday and this morning at 8.30am when I pulled another of the same job, the colour had visibly shifted. After leaving the machine for an hour or so during which the...

Hi everyone, After pausing and doing a "self check" in the middle of a run. The colour shifted quite dramatically on this machine. Not ideal, can the self checking be temporarily turned off whilst running? Thanks in advance for any help.