Recent content by Chris_PTA

  1. C

    SM52 Plate thickness

    Bare metal.
  2. C

    SM52 Plate thickness

    Looking for confirmation that running plates of 0.2mm thickness on the SM52 is a bad option. My thinking is: Machine specs say plates thickness of 0.15mm. Changing plate thickness will alter print length. Also means that blanket needs to be packed less to give correct printing pressure between...
  3. C

    Consiistent-excessive dot gain/TVI on all units.

    Blanket packing is best checked with a blanket gauge. http://www.roconex.com/1852/24901.html One also on eBay: http://www.ebay.com.au/itm/Roconex-Magnetic-Packing-Gauge-With-Plastic-Case-/152043141985
  4. C

    Problem with GTO 52-1 model 1997

    Ink strip width for all inking rollers should be 3-4mm
  5. C

    Ink Calculation Formula

    Spanks Spanks Attached is a pdf with the SPANKS formula. Chris
  6. C

    Grain direction on digital presses

    On a heavier stock it is better to run with the grain running across the machine. The stock will travel through the paper path with less effort and less jams.
See more
 
Back
Top