Recent content by CNS Systems

If your using a platemaker like Itek, 3m or something like them, we have been replacing them with a Kimosetter 410. It is a desktop thermal image printer that will produce a 5ml poly plate. This chemical free CTP System is low cost, maintenance free and your plate cost is under $2.00 per plate.

We are an authorized service center for Kimoto. If your looking for a tuneup for your Kimosetter we can take care of that. You can contact us at [email protected]

Used Kimosetter Used Kimosetter Did you ever find a used KImosetter 340. If not we have 2 refurbished 340's with a PC Rip Let us know if still interested

Well the Kimosetter 410 blows away anything that an HP 5000 or the Xante can output. So if the quality of those are not good enough there is the Kimosetter 525 which can handle everything you would need. The best thing is it's chemical free and maintence free. It actually cleans itself.

All depends on how much your looking to spend. We sell a chemical free system called Kimoto. They have a low end system that is very inexpensive with low cost plates and a high end system that would would handle everything that you will need.

He did say he was a small shop doing mostly line work and some screens. How much can he do with lazer plates anyway.

Yes it is expensive @ $30,000. The dot off of a Kimosetter is extremly hard. The only draw back is you can't go finer than 100 line. But he was using lazer plates for years and was happy with quality. So the Kimosetter blows any toner scattered system away. Not to mention your keeping $25,000...

All suggestions are good but expensive. We sell a tabletop system that works perfect. No chemistry and uses a 5ml poly plate. The Kimosetter 410 works very well and can handle the work load.

Cheap way to go Cheap way to go The Kimosetter CTP is under $5000.00 and produces a 5ml. Poly plate for under $2.00 per plate. It's chemical free so no maintenance required.

Inexpensive CTP Inexpensive CTP One of the best and inexpensive Direct to Plate Systems is the Kimosetter 340 or 410. Chemical free system using a 5ml Poly plate. Spec for 5000 impressions. Most of my customers get anywhere from 3000 - 18000 impressions. Depending on how good the press is...