Recent content by COGordon

I know where the elevator, separator and airflow controls are but where are the others located?

Interesting. I hadn't heard of that. I will check it out.

Hello Everyone, I am running into some serious double feeding issues with my Duplo 646. On anything lighter than card stock it wants to double feed. I've spoken with company that services our machine and they gave me some dial settings but they unfortunately they haven't made much difference. I...

Thank you for your reply. I have reached to Skandacor and they havent had much advice in this situation. I am attempting to connect Konica with them but it's been a challenge. Are you familiar with Konica settings? Im not sure I know, besides running the IQ and adjusting imposition on Fiery...

Hello Everyone, I have a Konica 7100. Recently my shop purchased a Skandacor Sleeker. For those who are unfamiliar you print black then run the paper through the sleeker which than applies foil to the black toner. You then run it again through the printer to print the remaining image. Our issue...

I use the stock scanner to find something close to it from the master catalog and then create a new stock.

Thats the situation I've been running into. After being told by my normal tech we just need to know our "Liberry" better and refusing to help in any way we've escalated it to their national techs. They think there might be an equipment problem but are still reviewing samples I sent. I have a...

Im in Colorado where it is very dry. We have an in line humidifier that usually keeps us around 25-30%

I haven't adjusted the speed, that might be an option but I would need help finding the setting. I have adjusted the paper and the image transfer settings to their full extremes with limited success. I tried running them as textured but hadn't see much difference. I experience this problem on...

Hello, Ive had some color issues with my Ricoh 7210. It prints fine on coated stock but anything uncoated lacks density and is very spotty. I've adjusted the voltage on the paper and the image but it only makes a small difference. Does anyone have any advice? At this point I have to run all my...