Recent content by donp

That thought crossed my mind but never tried it. Thanks for the info. Any way to know what it’s looking at? I asked our service guy but he didn’t know.

A customer asked if we could add a couple words to an already completed print job. Space was not a problem so I offered to run the printed sheets through as a 2nd pass. Job ran fine at first (we had crop marks to hit) but then register moved 1/8”, ran some more, moved partially back, ran more...

Agree 100% - complete RIP reinstall twice (they wiped the hard drive), a couple different versions of CWS tried. Evidently the most recent version is not necessarily approved by Canon, so they tried latest Canon-approved version. Not sure on the firmware on the unit. I have to say, I've very...

One thing I never seem to get around to doing is gaining a more in-depth understanding of what’s going on with the big white box. EFI has quite a lot online, seems like a good place to start.

I don't see that selection - where is it?

Dealer guys were in all day Thursday trying to figure out the face up/face down and some sheet quantities not working. Started 2 tickets w Canon engineering, appears related to color profile selection - we’re running everything w plain output profile in CWS and it seems to be functional. Will...

I’ve made this exact case to the dealer, in fact Canon tech was in several weeks ago (different issues). some problems fixed, new ones appearing. Seems to me that the latest and greatest from EFI isn’t ready for prime time at least with the V700. Whole thing is very frustrating but at least...

Yes cold reboot. Seems to be related to heavy paper, not sheet size. Looking in paper settings for a clue.

Behavior is same for dbp and flattened pdf from impose. Non imposed files do the same thing. It’s as if there is no functionality on delivery choice in cws - but only on large sheets (12 x 18). Another twist just discovered Thursday - had an imposed job on 12 x 18 and it would not print 20...

Thanks for the reply - by VD do you mean variable data? If so, no variable data associated with the files. Also, single sided files do the same thing even on different stocks. I’ll try feeding a large sheet from the drawers rather than paper deck. One more glitch discovered on Thursday -...

Recently installed Canon v700 w latest canon approved Fiery. When printing an imposed pdf file, face up / face down delivery selections are ignored - everything is delivering face down regardless of choice in CWS, with 2 recent exceptions both smaller sheets although I don’t know if that really...

My first suggestion would be to get an introductory book out of the library so you can learn how to make a stencil, (stretch and coat a screen with emulsion, expose with a film positive, wash out image with water, blockout and tape remainder of the screen). You'll need to buy a gallon of litho...

Hello, I have a Lino 530, using Navigator 6. When I image a job, it prints off the film to the left and will not image beyond 24" length. The page setup is set to center the image horizontally. The media length is set to 24" and is grayed out, ie not editable. I want to print an 18 x 26 job...