Recent content by Joe Duffy

I bought QuietSuite3 for this and it is simple and easy to setup - also not very expensive

Have an immediate opening for a digital web inkjet pressman near O'Hare Airport in Chicago. Hours are TU-TH 4:00 pm - 5:30 AM (40.5 hours weekly). Previous web or inkjet experience preferred.

password on login to the appogee - log off then log on holding CTL and try CONECTX in all caps

While the cost gap has narrowed, the thing to keep in mind with RISO is the more you use them, the better thy run. Unlike toner, the lack of heat actually helps with longer runs and constant use. You want to be sure you have adequate service in your area at the volumes you are talking about but...

I know this seems odd but it worked at one time for me. Had a older Miller TP38 and had a similar problem, just could not get a good solid brown or forest green from the press on a number 2 coated sheet. Streaked and looked bad. Thought maybe the customer had at one time built in starvation...

If you like to be warm and toasted, use iMacs ;) Really depends upon your work in RAM intensive programs...if you use alot of RAM, go Pro, if not, iMacs are fine. I have always favored the PRO for a workstation (loaded with lots of RAM and it has way more air flow for cooling) and iMac for...

Looked at this at the show in October - seems like a better version of inkjet because of the color control. Still Memjet technology. iJetPress Digital Inkjet Press Benefits - powered by Memjet

paper shinkage

+1 on the 10000 - nice for the $

Are you only using Nexus as a RIP or do you have an entire workflow solution? The workflow wrapped around Navigator is very limited compared to Nexus so be sure you are looking at like solutions. Be sure to test real files and many files. Not just your everyday files but some of the ones you...

Looked at Jpress last year. Very good quality but speed and unit cost not there for me yet.

Impressions Per Hour/60=Impressions per minute Impressions needed/Impressions per minute = run time required does not include plate time, make ready or clean up.

The best stand alone pdf editor I have used is ArtPro by Esko. Yes, it is expensive and licence is by seat, but it takes in any pdf or ai file and allows full edits of traps, etc and outputs back to ai or pdf format. Check with Esko for a demo version. That being said, I agree with ajr that...

Your math points out that you are running 83+ clicks per minute per machine for 12 hours a day for 5 days a week(300,000 clicks/5 days/12 hours /60 minutes) and you are concerned you are down for 1 call per day - you need another spare machine to handle the load of the one that will be down...

Assuming the pdf is not a exported from Publisher or some other wonderful Microsoft Office answer and even if the fonts are embedded, it could be that they are those wonderful FREE fonts people like - I have fought those numerous times. Convert to outlines even yielded wierd space results. I...