Recent content by mohamed

  1. M

    errors on RIP for MEGASETTER 600Q+

    What can I resolve these What can I resolve these errors on RIP for MEGASETTER 600Q+ ? Error: error: FRip/IPL Error: License check failed for key "FASTRIPIPL" . . . Error: error heartbeat not enabled: status = 0x03 Error: error qh_init: qh_heartbeat failed Error: error Failed to initialise...
  2. M

    Errors message on RIP

    What can I resolve these errors on RIP for MEGASETTER 600Q+ ? Error: error: FRip/IPL Error: License check failed for key "FASTRIPIPL" . . . Error: error heartbeat not enabled: status = 0x03 Error: error qh_init: qh_heartbeat failed Error: error Failed to initialise driver to startup...
  3. M

    PROBLEM megasetter

    All is ok now The problem was in the power of drum Thank you Armya
  4. M

    PROBLEM megasetter

    Thank you Farshad Now i have only the first message ERROR: E8 drum speed up failure. This error appears after the: Ready to work Reading parameters from PROM loading film releasing drum vacuum for 20s...done Film loaded Speed up drum Shut-init Drum speed : 0 Error: E8 drum speed up failure...
  5. M

    PROBLEM megasetter

    yes, I know, thank you
  6. M

    PROBLEM megasetter

    I have PROBLEM on my megasetter 600q+ with this error message : - E8 DRUM sPEED UP FAILURE, speed sown drum - Error EZ DRUM POSITIONNING ERROR POS=5462 as hed 13560 Thank you for help
  7. M

    Problem of density

    I need technical manual to do this. Can you show me where i can download it ? Thank you
  8. M

    Problem of density

    Yes the Dmax is low. I try to change the resolution from 2540 to 4000 and the puissance lazer to 350 but the result is also bad. we
  9. M

    Problem of density

    I have a problem of density with Barco Megasetter 600Q. Can you help me how i can do the setting?
  10. M

    megasetter q 600 plus

    How i can do the laser calibration of my megasetter Q 600 plus ? Also, how i can reset the message "the processor is offline" when the processor is power on, online and connected to the megasetter ?
  11. M

    Problem in selectset 44s

    THANK YOU FOR YOUR HELP the problem was in bad connection of a sensor in the input of the processor
  12. M

    Agfa Selectset 5000""Missed Break Point" error

    Missed breakpoint Recorder Missed its Break Point The recorder received more data than it expected.
  13. M

    Problem in selectset 44s

    thank you for your suggests after reading 28yrAGFASE i verify the input sensors of olp 36/44 The problem was in the connector of sensor in the input of processor thank you all
  14. M

    Problem in selectset 44s

    thank you for your suggests After reading 28yrAGFASE reply "check the input sensors of the processor. Especially check the sensor that is on its own guide across the film path''; sensors on processor. it is a bad connection of the sensor purchase in the entry of processor the imagesetter is...
  15. M

    service manual of Barco Megasetter Plus Q 600+

    Can you help me to download the service manual of Barco Megasetter Plus Q 600+ ?
See more

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….

 
Back
Top