Recent content by nineville

If it is edge sensor, during booting up and initilalization of various peripherals it will display the same error. What is the issue is some wrong PIDs.

Are you sure the virtual printer is not paused? Also double check there is network connectivity between the 2 systems that served as the metadimension and signastation; if they are separate system

material transport error material transport error 3260 = Type ERROR 3260_UT = An error occurred at material transport. 3260_ST = Moving the flaps failed. They didn't reach their in-or-out target position. 3260_UH = Switch off the recorder and restart it. If the error still occurs, note down...

Hi, LoWang. I sent private message to you, PM. kindly reply as soon as you can. Many thanks

Dear All, i ve a hercules pro filmsetter with deltatower & deltatech 4.2. all things are working fine till computer crashed. i formatted it & after setting up the printmanager queues, i sent job from coreldraw it complained on error on postcript. anybody with the knowledge on how to solve and...

Dear All, Can anybody help? I am having error 4139 on our plate loader connecting a prosetter. What is strange there is that the jalousie would have successfully moved and separated the plate and the paper. The paper to the waste tray and the plate to the drum of prosetter. Still it will be...

I have it but won,t give you. why? it is against Heidelberg confidentiality agreement. regards

Thanks a lot for your helpful response. I will try and change the power supply and get back you. My kindest regards

Single cassette loader issue I have a question. We have a Heidelberg Single Cassette Loader (SCL) which is not coming ON. there is power cable 230 volts input to the power pack I am not getting any output Dc. Even the fan on the Chassis is not blowing after ON the power supply. How can I test if...

Dear All, Good day. Please I need Prinect Signastation software, dongle and PC. It can be prinect Signa 1.0 upward. Anybody having for sale should contact with the price and quote to: [email protected] Thanks.

Hi, It might be that the system software is corrupt. format and reset up the opearting system, probabily it will work.

Hi, Maybe your windows operatirng system is corrupt. You may need to format it and set it up afresh. Make sure you remove the dongle b4 going ahead.

harlequin calibration tool Dear All, Thanks for your elaborate reply. It realy helped me. The system is now working now. Am grateful. Nene

You are all right by your submissions. However the problem in this case has to do with the Laser, focus and filter settings on my Harlequin which can only be carried out by using calibration tool from manufacturer like High-water etc Not with the developer or processor because other resolution...

You are all right by your submissions. However the problem in this case has to do with the Laser, focus and filter settings on my Harlequin which can only be carried out by using calibration tool from manufacturer like High-water etc Not with the developer or processor because other resolution...