Pennypicher's latest activity
-
PPennypicher replied to the thread Duplo DBM 350.Is it every book now? Maybe try a bunch with no staple just to eliminate them. Try leaving the rear jog loose so there is NO pressure...
-
PPennypicher replied to the thread Duplo DBM 350.So when the book gets stapled the stopper drops down and the pusher on the center belt advances the book forward. When this happens what...
-
PPennypicher replied to the thread Duplo DBM 350.Welcome to insanity. Look at the stitch head stopper fingers. Is it broken? Or is it sluggish when dropping out of the way? If it gets...
-
PPennypicher replied to the thread Polar 66 Cutter no longer cutting through entire stack.shear bolts were always a issue.
-
PPennypicher replied to the thread Duplo 618 display cutter locked.Not sure what your cutter cycle count is but the blade unit and motor assy are one unit now. If the blade is worn the gear driven motor...
-
PPennypicher replied to the thread Challenge MPC 305.Go to about 8" then hold the forward key. BG should move in very slow mode as it doesnt know where it is. Then about 5" it should...
-
PPennypicher replied to the thread Duplo DBM 120 parts.Are you in the USA? Do you have a photo or part number? I know they updated some of the sensors with different sensor kits as the sensor...
-
PPennypicher replied to the thread Duplo stitch cartridges.Swingline actually makes them for everyone from what I heard. And duplo no longer supports the 120 booklet maker
-
PPennypicher replied to the thread Booklet Maker That Will Stitch Envelopes.Duplo has discontinued the 5000 booklet maker so your 1 part out of the junk pile. The DBM600 and the 10/60 tower with the envelope kit...
-
Pfind a 70 year old heavy equipment mechanic who likes to dabble with electronics and takes payment in premium beer.
-
PPennypicher replied to the thread Challenge Titan 200.so i have a old model 20 cutter that wont cycle when the buttons are pressed. but when the clamp drifts down the pump will power it back...
