Recent content by PhillyPrinter

I asked heidelberg tec and he said there is no other way but to buy the upgrade. I wish mine would hold more jobs also! My company does not want to pay for the upgrade.

Found the problem today. When the pile centering eyes drop to read the load in the feeder the operator side eye was pinching the wires to that eye and sending a short to the inkline canasters and believe it or not, it will cause the feeder to trip also. There are three wires going to the eye and...

thank you for your help Mike!!

Hi Mike, I am not getting yellow circle T showing up in the console. No error on the monitor. However, I have not checked the dynamic error codes. I will do that, thanks. I found that the ink line and the feeder run through the same eak board. So I did swap out the feeder eak board with the...

Nobody has done anything with the system. That's what is so strange. It's like there is a dead short that happens and knocks all units out. But then you can just restart the canisters. Thanks

I have had this problem in the past and in our shop each unit has it's own chiller for the fountain solution.(some presses have one central unit for the whole press). Check to be sure that the fountain solution in that unit is nice and cold like all the other units. If it is not cold it will...

I have been having problems with our tecnotrans inkline canisters on our heidelberg 102cd 6/c w/coater shutting down (all units at one time). What's even more peculiar it is random. But when it does happen it is when the load in the feeder is brought up and as soon as the pile centering eyes...