Recent content by Print Instructor

good morning everybody, as you can see at machine spezification list, the machine speed is about 15.000 sheets per hour. Not bad I mean this is really fast. In the past I did some presentations and almost printed with maximum machine speed, not depend on wich type of paper or paper quality. This...

The machine Specifications: Running speed: 4,000 - 15,200SPH Maximum sheet size: 520 x 750 mm (20 15/32"×29 17/32") Or 23": 585 x 750mm (23 1/32" x 29 17/32") Min sheet size 200 x 296 mm (7 7/8"×11 21/32") Maximum printing area: 510 x 740 mm (20 5/64"×29 9/64") Or 23" : 575 x 740mm (22...

Yes of course its said that Shinohara have been closed. I knew a few people from Shizuoka and Technicians from Amsterdam. All lost there jobs. Well, nobody knows exactely what GRONHI expect to do with such a good performed machine. Last conversation at exebition DRUPA in Germany 2012 had not...

Hi, I´m a print instructor from Germany. Working also at Shinohara machines, know a lot about. The owner of Shinohara now is a chinese company - HANS GRONHI - which is represented by German company named EURO MEDIA PRESS in the city of Hannover. This time its not easy to get spare-part for that...

PRINT INSTRUCTOR - Mr. Burger, Germany Consultant and techn. Assistent to Print Shops in setting up aprentice (employee) training. Maintain and revise standards to ensure the quality of training. Please contact: [email protected]

So, its a Speedmaster 102-8color machine. You said you had changed EAK-cards severall time and reset pin. Does this means, that you had start ´initialization prozess´ ?? If YES, all parameters, data in CPTronic, shall be checked. In this process normally some data have been lost, or apear...

OK- man what you need is a specialist. You cannot fix that problem.:( It apears to me as a serious problem with EAK (In/+Outcoming-control cards) and switches. With the time you will get a total loss of the system and the machine then is blocked. Did you installed the machine ? When it was...

At least I can just say that you should check all cabel connection again and again. In some areas the correct connection at electronic box - small boxes under the cabinet - shall be incorrect. Whats your job doing in Hanoi ? I´m still asking because I have a customer in Bin Duong and I will be...

All EAK-electronic cards can be exchanged with each other. These cards are all identical. Depending on the machine and the machine type, you have several of them, up to six EAK-cards in the electronic cabinet. If that doesn´t help, you need help by specialist. Never put hands on electronic...

EAK 03 Problem EAK 03 Problem The Problem you discribed is mainly a problem with ´security switches´. EAK is the device which is checking all switches in all units. I guess, that you have a problem with one or two of these switches, mainly at PU3. Increasing machine speed means that...