Recent content by Quickmaster60

Suspension Envelope Feeder Suspension Envelope Feeder I have a video of me running this feeder on a Heidelberg QM46-2. I can give pictures also if you want. https://www.youtube.com/watch?v=ZHe7Xll_hsI

This is a new style suspension feeder, not the old one. This particular one is brand new and was only used by me for one demo. This feeder and delivery conveyor sell for $7,000 new. I am asking $2,500 for this feeder and delivery. I have a video on you tube that you can see me running it at...

I am a tech. on the Quickmasters since they first came out and worked for Heidelberg for 23 years. I can tell you that i never use Syntac rollers and i always tell my customers up front that i will put them in and stripe them up, but i give no guarentee on the performance. Always use Bottcher...

Printing envelopes Printing envelopes Dan, I have worked on the QM since its inception and you are right, envelopes can be an issue, but there are things you can do to help. Number one , do you have the extended suckers on the press? these help alot. Number two, make sure your feeder timing...

electrical issue electrical issue i worked for heidelberg for 23 years, 10 as an electrician. it could be either the pot or the motor. sometimes the pots will act eratic and cause the motor to move on its own. it cn also be that there is oil in the motor. i would replace the pot and remove...

if all the settings are right then make sure the network cable is properly seated in the IPC. i did have a problem once that wound up being a bad network connection. also, if the IT dept. made any changes to the settings or re-installed them, you must reboot the press and sometimes it may take a...

if your register movement is in one unit it can be the pot. for the motor. either lateral or circumferential. it can also be the motor. Also you can try swapping SSK boards from one unit to the next and see if the problem moves to the other unit.

have your IT guy check the PATH setting in cp2000.

HI, thanks for contacting me. I do travel alot, not so much across the country. I would be willing to travel across the country depending on what the job is, can you tell me exactly what you need done? Quickmaster60

Hi everyone im Joe. I worked for Heidelberg U.S.A. for 23 years. I worked as a lead mechanic for the Quickmaster 46-2 color line from its beggining. I also worked as a full line electrician. I started my own service buisness in January of 2011. I have been married for 25 years to my childhood...

I do agree that an impression cylinder is not a good thing to have go on you. I must say that $5000 is way too much to pay for one unless you get it from Heidelberg. I happen to know soneone who has a new one and will sell it for FAR less. As far as doing an install of a impression cylinder, its...

Does your company need faster, more professional service on theyre Quickmaster 46-2? Why pay standard Heidelberg prices for service? Check us out at [url=http://www.pressmeister.com] and see how affordable service can be for your Quickmaster46-2

QM-46 mechanic, 22+ years field service on TOK,TOM,and QM-46. I have also done electrican work on full line presses. I have stareted my own buisness and have an LLC in pennsylvania and am also licensed in New Jersey. I am fully insured. My rates are reasonable and competative to Heidelberg...