Recent content by Steve Bris

Yes, one of the first things we checked here.

Ya, has been ongoing for awhile. Ive ordered a slightly shorter blanket to try. 24 5/8" instead of 24 11/16.

Yes they are.

Forgot to add that we torque the blanket again after approx 40k impressions

Basically inch Blanket around cylinder. Start at one end and get each of the 6 bolts started. Once all bolts are started go back to middle and torque down to 35lbs, again starting in middle and working your way out to end. We never crack the torque wrench on the very end bolts, slightly less...

Hey Alois, no disrespect intended. Just looking for some info on blanket sizes from others in the business, that's all my friend

Hey Alois, I don't have the time to type out exact procedure and I know we are doing it correctly, this is a new problem. I was always told not to use paper packing with a compressible blanket. Been running these presses for 15 years and have never used mylar under the blankets, only under...

Blanket dimensions we use are 24.69 X 35. We run Day 9500 3Ply Compressible. We are having problems with blankets torqing down tight to cylinder. We torque them to 35lbs but you can still feel a bubble underneath blanket unless you take it down a few more turns with a T Handle which you...